용인 기흥구에서 최고의 customer service 채용공고 5개(지금 채용 중!)

Electrical Engineer for KTC R&D Center
Lam Research —경기도 용인
SOC Engineering, Sr Engineer
Synopsys —성남 판교역로
8시간
Service Support Technician
MKS Inc. —용인 기흥단지로
- 정규직
빠른 지원하기
FPGA Software Engineer
MKS Inc. —용인 기흥단지로
- 정규직
빠른 지원하기
Senior Embedded Firmware Test Engineer
MKS Inc. —용인 기흥단지로
- 정규직
빠른 지원하기

Discover related jobs

Based on your search for customer service jobs.

Account Coordinator
TransPerfect —서울
TransPerfect Is More Than Just a Job…. Our greatest asset is our people, and nothing is more important to us than ensuring that everyone knows that.
Advertising & Digital Coordinator
Hermès Paris —서울
REPORTS TO: Advertising & Digital Manager. We are looking for a detail-oriented and collaborative Coordinator to join our two-person Advertising & Digital team.

Show more related jobs

용인 기흥구의 customer service에 대한 최신 취업소식을 받고 싶습니다.

계정에 로그인하면 SimplyHired의 서비스 이용약관과 쿠키 및 개인정보 취급방침에 동의하는 것입니다.

더 많은 지역의 채용공고 둘러보기

customer service jobs near 용인 기흥구

경기도 용인 지역 R&D Engineer 채용공고

경기도 용인 지역 Support Technician 채용공고

서울 지역 Security Engineer 채용공고

서울 지역 Project Engineer 35,000,000원 채용공고

서울 지역 Devops Engineer 채용공고

서울특별시 지역 Embedded Software Engineer 채용공고

서울 지역 Senior Network Engineer 채용공고

서울 지역 Cost Engineer 채용공고

서울 지역 Data Center Engineer 채용공고

서울 여의도역 지역 Ai Engineer 채용공고

부천 도당동 지역 Support 채용공고

경기도 김포 지역 It Support 채용공고

Electrical Engineer for KTC R&D Center

Lam Research -
경기도 용인

지금 지원하기

채용공고 세부정보

상세 직무 내용

Requisition ID

201185

Date posted

07/10/2026

Work Location Model

On-site

Work Location

Yongin-KR-Yongin-03

Work Country

Korea (the Republic of)

Short Description

Electrical Engineer

General

The Global Workplace Solutions group manages a worldwide portfolio of real estate and facilities of nearly two million square feet in the San Francisco Bay Area, one million square feet in Oregon, and potentially adding facilities in Asia in the next two years. Ensuring that all sites operate smoothly without disruption, this group also provides lab services such as gas and chemical delivery, tool installation projects, and cleanroom garments. This group is responsible for conducting all construction and site improvement work to ensure that all work complies with global and local regulatory requirements. This group also provides engineering work to support infrastructure maintenance and construction.

This key position will lead a team to not only achieve these objectives but will also benchmark and measure key performance indicators to pursue progressive improvements, both in service and spending improvement to an annual budget of about $100M in operations and rental expenses.

This position works closely with the Real Estate and Space Planning leadership team to support sound decision making with qualitative and quantitative analysis. Examples include analyses such as financial and qualitative analysis to inform our real estate strategy at a regional and global level, considering factors such as real estate supply, potential headcount growth scenarios, potential new office openings, manufacturing needs. Analyses around leasing vs. buying, subleasing, usage of short-term space vs. long-term leases, and cost of tenant improvements. Continuous improvement of the office, manufacturing, R&D, and warehouse spaces will help improve the efficiency and quality of our workspace, that will improve the productivity of our employees, and that will help attract and retain highly talented employees.

Responsibilities

Major roles and responsibilities

Responsible for KTC and Y campus office electrical infrastructure systems

Core electrical systems of responsibility include, but not limited to:

Medium voltage systems (22.9kV distribution)
Low voltage systems (480V/208V distribution, UPS, Emergency Generator/ATS)
Design, develop, modify Electrical hardware systems
Selects OEM components and materials for power distribution box/control panel design
Creates and releases engineering drawings & bill of materials using engineering change management process
Creates electrical schematics and system based on requirements
Conducts and drives design review for new concepts
Assists with development, and refinement of functional specifications for electrical systems and power distribution
Works with multidisciplinary engineering design teams to design and modify custom and OEM system components
Manage and cooperate with OSP
Provide electrical engineering design review input and approval for facility infrastructure and process tool installation projects
Provide electrical engineering construction input and commissioning support for facility infrastructure projects
Review short circuit coordination and arc flash studies and provide input to improve system coordination and reliability
Support as-build documentation of electrical system and single line diagrams
Maintain load/capacity reports for facility infrastructure systems and forecast load growth
Drive improvement of electrical infrastructure to increase system reliability and up time
Experience with standard operating procedure creation and training skills
Experience with energy efficiency improvement projects
Work directly with contractors and service providers to ensure delivery of operational results
Perform Failure Mode and Effect Analysis during project design development phase
Capital and expense project financial management and control experience

Qualifications

Bachelor's degree (or equivalent) in electrical engineering or similar and a minimum of 4 years of related experience
Good oral and written communication skills in English
Familiar with KEC and IEC standards
Experience working with KEPCO and KESCO
Highly proficient in power panel electrical circuit design with safety interlocks & 3 phase load analysis
Good working knowledge in PCB/ Low voltage circuit design for power and control applications
Expert in application of power and controls technologies for systems automation
Understanding of AC/DC Power distribution systems required
Experience working with insurance provider (FM Global) to ensure reliable facility operation
Familiarity using power modeling software, especially ETAP
Strong working knowledge of NFPA 70/NEC code requirements and NFPA 70E electrical safety requirements
Experience creating equipment maintenance programs to align with NFPA 70B and NETA requirements

Preferred qualifications

Excellent people skills with demonstrated ability to work effectively and efficiently with diverse teams, customers, internal and external partners.1
Prior experience with MS office tools (ppt, excel, project)
Previous experience leading technical projects
Strong project management, communication, analytical, and problem-solving skill
Effectively read, write, and communicate with others in English
Comfortable with travelling
Experience with capital equipment, Electrical control/Power box or similar (for e.g., process industries, aircraft, etc.) industry in a sub-system / module design project
Experience in selection of components, setting up equipment for experimentation / testing in laboratory environment, setting up safe practices
Experience of power distribution and/or control system design of complex systems
The certification requirement is for Electrical License

Our commitment

We believe it is important for every person to feel valued, included, and empowered to achieve their full potential. By bringing unique individuals and viewpoints together, we achieve extraordinary results.

Lam Research ("Lam" or the "Company") is an equal opportunity employer. Lam is committed to and reaffirms support of equal opportunity in employment and non-discrimination in employment policies, practices and procedures on the basis of race, religious creed, color, national origin, ancestry, physical disability, mental disability, medical condition, genetic information, marital status, sex (including pregnancy, childbirth and related medical conditions), gender, gender identity, gender expression, age, sexual orientation, or military and veteran status or any other category protected by applicable federal, state, or local laws. It is the Company's intention to comply with all applicable laws and regulations. Company policy prohibits unlawful discrimination against applicants or employees.

Lam offers a variety of work location models based on the needs of each role. Our hybrid roles combine the benefits of on-site collaboration with colleagues and the flexibility to work remotely and fall into two categories – On-site Flex and Virtual Flex. ‘On-site Flex’ you’ll work 3+ days per week on-site at a Lam or customer/supplier location, with the opportunity to work remotely for the balance of the week. ‘Virtual Flex’ you’ll work 1-2 days per week on-site at a Lam or customer/supplier location, and remotely the rest of the time.

지금 지원하기

검색결과 새로고침

용인 기흥구 지역 채용공고 customer service건

Electrical Engineer for KTC R&D Center

SOC Engineering, Sr Engineer

Service Support Technician

FPGA Software Engineer

Senior Embedded Firmware Test Engineer

Discover related jobs

용인 기흥구의 customer service에 대한 최신 취업소식을 받고 싶습니다.

더 많은 지역의 채용공고 둘러보기

Short Description

General

Responsibilities

Qualifications

Preferred qualifications

Our commitment

구직자 도구

기업회원 도구

찾아보기

연결 상태 유지하기